Corrosion resistant working condition

For valves under corrosive medium conditions, anti-corrosion is the most critical part of chemical equipment. If the metal material of chemical valves cannot be selected correctly, a little carelessness will damage the equipment at light level, and cause accidents or even disasters at worst. Our xinhui can produce relevant Corrosion resistant working condition valves for you. Contact us for details!

Почему стоит выбрать клапаны Newinteg!

Наше желание – чтобы вы нашли всё необходимое у нас, не обращаясь к другим!

You Need to Know About Valve Corrosion resistant working condition！

Corrosion resistant working condition

For valves that come into contact with corrosive fluid, some special precautions are essential.

If the metallic material of the chemical valves is not selected correctly, the risk of damage to the equipment will increase exponentially, leading in a short time to serious accidents. According to the latest statistics, around 60% of damage to chemical equipment is caused by corrosion. Therefore, during the selection of chemical equipment it is necessary to pay close attention to the material of which they are made. Very often stainless steel is chosen by mistakenly thinking that it is a “universal material”. This idea is totally incorrect and dangerous, regardless of the medium and environmental conditions in which the steel will be used.

Xinhui Valve provides PTFE protective spray and PTFE coating, to offer you micro abrasion prevention and maximum safety.

Below are the main chemical means, commonly used in the industrial sector:

Medium of sulfuric acid

Sulfuric acid is an important industrial raw material with a wide range of uses, usable in different concentrations and temperatures that cause large differences in corrosion in materials.

For concentrated sulfuric acid with a concentration above 80% and a temperature below 80 ° C, carbon steel and cast iron have better corrosion resistance, but still remain unsuitable if the sulfuric acid flows to high speed.

Even ordinary stainless steel such as 304 (0Cr18Ni9) and 316 (0Cr18Ni12Mo2Ti) is not the best choice for sulfuric acid media.Therefore, pumps and valves for conveying sulfuric acid are usually made of high silicon cast iron (difficult to cast and machine) and high alloy stainless steel (20 # alloy). Fluoroplastics have better resistance to sulfuric acid and, in addition, choosing a fluorine-coated pump (F46) is cheaper. However, when the temperature is above 100 ℃ or the pressure is above 16kg, all plastic will be destroyed and, in this case, the only valves currently usable are ceramic ball valves.

Medium of hydrochloric acid

Most of the metallic materials are not resistant to the corrosion of hydrochloric acid (including various stainless steel materials), and the molybdenum-containing ferrosilicon can only be used for hydrochloric acid below 50 ° C and 30%. Contrary to metallic materials, most non-metallic materials have good corrosion resistance of hydrochloric acid, so rubber coated pumps and plastic pumps (such as polypropylene, fluoroplastics, etc.) are the best choices for supplying acid hydrochloric.

Nitric acid medium

A large variety of metals undergo rapid corrosion in contact with nitric acid with the exception of stainless steel, which remains the corrosion resistant material used, for all concentrations of nitric acid at room temperature. For high temperature nitric acid, titanium materials and titanium alloys are usually used.

Acetic acid medium

This medium is one of the most corrosive substances among organic acids. The best option is 316 stainless steel, which contains molybdenum, can also be used at high temperatures and is capable of diluting the vapor of acetic acid. For severe requirements such as high temperature and high concentration of acetic acid or other corrosive fluids, highly alloyed stainless steel or fluoroplastic pumps can be selected.

Alkali (sodium hydroxide)

Steel is widely used in sodium hydroxide solution below 80 ° C and a concentration of 30% and many petrochemical plants still use ordinary steel at 100 ° C and below 75%. Although corrosion increases, it is inexpensive. good sex. Compared to cast iron, the corrosion resistance of ordinary stainless steel to lye has no obvious advantages. As long as a small amount of iron can be mixed in the medium, stainless steel is not recommended. For the high-temperature lye, mainly titanium and titanium alloys or highly alloyed stainless steel are used.

Ammonia (ammonium hydroxide)

Most metals and non-metals are only slightly corroded into liquid ammonia and ammonia water (ammonium hydroxide), only copper and copper alloys are not suitable for use.

Salt water (sea water)

The corrosion rate of ordinary steel in sodium chloride solution, sea water and salt water is not very high and, generally, it is enough to protect it with paint. On the other hand, all types of stainless steel also have a low corrosion rate in contact with salt water. Alcohols, ketones, esters, ethers

All common media such as:

Alcohol media (include methanol, ethanol, ethylene glycol, propanol, etc)
Ketone media (include acetone, butanone, etc)
Ester media (include various methyl esters, ethyl ester, etc)
Ether-based media (include methyl ether, ether, butyl ether, etc) are basically non-corrosive!

The selection of materials should be based on the properties of the medium and the requirements relevant to the work to be carried out.

Другие статьи по клапанам

Мы уверены, вы не пожалеете о своем выборе

Why choose XinHui valve?

Индивидуальные решения по запросу

Мы будем рады принять ваши требования в отрасли, наши промышленные клапанные решения включают индивидуальные решения по запросу! Мы используем лучшие материалы для производства клапанов, соответствующих стандартам. Если вам требуются услуги по индивидуальному изготовлению клапанов, свяжитесь с нами немедленно

Качество клапанов

Xinhui valve strictly controls the quality of the products in each process; on the other hand, it improves the work quality of the employees; and constantly pursues the high performance and high quality of the products, and is committed to becoming the preferred brand of valve products for the majority of users. .

Профессиональные услуги

Наши менеджеры ответят на ваши профессиональные отраслевые вопросы, вопросы по продукции, вопросы транспортировки и т. д. Наши сотрудники службы поддержки онлайн 7 дней в неделю, 12 часов в сутки. Если у вас возникнут проблемы с разницей во времени, пожалуйста, терпеливо дождитесь нашего ответа, и мы ответим вам как можно скорее.

Высокие и новые технологии

Как высокотехнологичное предприятие в Китае, мы можем предоставить полные чертежи образцов клапанов, техническую поддержку процесса производства клапанов, техническую поддержку, такую как руководства по техническому обслуживанию, и расчетные книги. Часто задаваемые вопросы по эксплуатации клапанов.

Инновации в НИОКР

Xinhui Valve has invested a lot of manpower and funds in the innovative research and development of valves, and opened laboratories, inspection rooms, and R&D rooms. 20 kinds of new products are developed every year. Customized industry-specific valves for customers, dozens of products under severe valve conditions.

Международные стандарты

Производимые нами клапаны соответствуют различным международным показателям испытаний, а все виды клапанов производятся и принимаются в соответствии с соответствующими отечественными стандартами, такими как GB и JB, а также международными стандартами, такими как ANSI, API, JIS и BS. DIN. Пожалуйста, свяжитесь с нами для получения информации о специальных производственных стандартах.

Мы не только производитель клапанов, но и распространитель отраслевых знаний

ЗАПРОСИТЬ ЦЕНУ ДЛЯ ПОЛУЧЕНИЯ ДОПОЛНИТЕЛЬНОЙ ИНФОРМАЦИИ