High pressure working condition

Valves are widely used in the industrial field, involving different industries. For most of the chemical industry will face high pressure pipeline conditions, we are a valve solution supplier from China, specializing in the production of high temperature and high pressure power station valves. We can easily solve the industry of working condition, contact us immediately to obtain the consulting service of purchasing high-pressure working condition valve!

por que escolher válvulas newinteg!

Nosso desejo é que você nos encontre sem precisar procurar mais ninguém!

You Need to Know About High pressure working condition！

High pressure working condition

The high pressure valve can be of different types:

A valve whose absolute pressure is lower than 1 atmosphere is called a vacuum valve
Pressure ≤ 1.6MPa is called low pressure valve
The pressure of 2.5～6.4MPa is called medium pressure valve
The pressure of 10.0～80.0MPa is called high pressure valve
Pressure ≥100.0MPa is called ultra-high pressure valve

There are 2 working conditions for high-pressure valves:

1. The medium is at room temperature but the pressure is very high, such as valves for oil production and water injection in oil field

2. The medium is in a high temperature state and the pressure is also high, such as the main steam system valves used in thermal usinas de energia. Although, these two types are also “high pressure valves”, the design criteria and material selection are different. The former only considers strength and stiffness, while the latter should also consider the strength and creep of materials at high temperatures.

High pressure valve materials

Pressure-bearing parts and pressure-controlling parts

Componentes da válvula are divided, according to their functions in the whole valve, into:

1. Pressure-bearing parts: refer to parts designed to withstand pipeline media (pressure), such as valve bodies, valve covers, packing glands, valve stems, gaskets, and bolts

2. Pressure-controlling parts: refer to parts used to block or allow the flow of media, such as closing parts, valve seats, etc.

Shell material

The shell includes the valve body, valve cover and other parts, which directly bear the pressure of the medium and are the pressure-bearing parts of the valve. The material must have the required mechanical properties and chemical composition under the specified medium, temperature and pressure. The cold and hot processing manufacturability.

Valve stem material

The valve stem is one of the pressure-bearing parts of the valve. During the opening and closing process of the valve, it is subjected to tensile, compressive, shearing and torsional forces, and is in direct contact with the medium. The rod material must ensure sufficient strength and impact toughness under the specified medium, temperature and pressure, and must have the required corrosion resistance and scratch resistance, as well as good manufacturability.

Sealing surface material

The sealing surface is the key part of the valve. The material used for the sealing surface should be corrosion-resistant, erosion-resistant, scratch-resistant, have sufficient extrusion strength (specific pressure), and have sufficient oxidation resistance and thermal fatigue resistance at high temperatures. It is also required to have a linear expansion coefficient similar to that of the base material, and to have good processing and welding manufacturability. For the sealing surface of high pressure valves, cemented carbide is usually used.

Material of pressure-bearing fasteners

The pressure-bearing fasteners mainly refer to the middle flange connecting bolts and nuts, which directly bear the pressure of the medium on the valve and play a major role in preventing the leakage of the medium. strength and impact toughness.

Referring to the provisions of GB150.2-2011, JB/T 5300-2008, ASME B16.34 and other standards, the commonly used fastener materials for high-pressure valves are:

1. Alloy steel

Chinese standard: GB/T 3077 30CrMoA, 35CrMoA, 40Cr, 25Cr2MoVA, 25Cr2Mo1VA;

American Standards: ASTM A193-B16, ASTM A194.

2. Stainless steel

Chinese standard: GB/T 1220, 2007 2Cr13, 0Cr18Ni9, 0Cr18Ni10Ti, 0Cr17Ni12Mo2, 1Cr17Ni2, 1Cr18Ni9, 1Cr18Ni9Ti;

American Standards: ASTM A193, B8, B8M, ASTM A194, 8, 8M.

Packing and gasket materials

The packing and gasket for the valve are all packing to prevent the leakage of the medium. The packing is used to fill the space between the packing chamber and the valve stem to prevent the medium from leaking through the space between the valve stem and the packing chamber. The gasket is used to fill the two joint surfaces (such as the sealing surface between the valve body and the valve cover) to prevent the leakage of the medium from the joint surface.

Therefore, the requirements for materiais de embalagem are corrosion resistance, good sealing performance and small friction coefficient. The requirements for gasket materials are corrosion resistance, certain elasticity and plasticity and sufficient strength at working temperature.

Xinhui high pressure valve

The high-pressure valves produced by Xinhui Valve Group are designed and manufactured in strict accordance with the standards, with excellent performance and reliable sealing. The products are widely used in pipelines of various working conditions such as petroleum, chemical, pharmaceutical, and electric power industries.

We have been dedicating for years to the world of industrial valves, to companies that produce valves and actuators for industry, in particular in the oil sector, both for the extraction and refining of hydrocarbons and for transport via land or submarine oil pipelines, still in the sector of chemical and petrochemical plants.

Mais artigos relacionados a válvulas

Acreditamos que você não se arrependerá de sua escolha

Por que escolher válvulas XinHui?

Personalizado sob demanda

Damos as boas-vindas aos clientes para trazerem suas necessidades na indústria, nossas soluções de válvulas industriais incluem personalização sob demanda! Use os melhores materiais para produzir válvulas em conformidade com os padrões. Se precisar de serviços de personalização de válvulas, entre em contato conosco imediatamente.

Qualidade da Válvula

A Xinhui Valve controla rigorosamente a qualidade dos produtos em cada processo; por outro lado, melhora a qualidade do trabalho dos funcionários; e busca constantemente o alto desempenho e a alta qualidade dos produtos, comprometendo-se a se tornar a marca preferida de produtos de válvulas para a maioria dos usuários.

Serviços Profissionais

Nosso vendedor responderá às suas perguntas profissionais sobre a indústria, produtos, transporte, etc. Nossa equipe de atendimento está online 7 dias por semana, 12 horas por dia. Se você encontrar problemas de fuso horário, aguarde pacientemente nossa resposta, e responderemos o mais rápido possível. O problema.

Alta e nova tecnologia

Como uma empresa de alta tecnologia na China, podemos fornecer desenhos completos de amostras de válvulas, suporte técnico para o processo de produção de válvulas, suporte técnico como manuais de manutenção e livros de cálculo de resistência. Perguntas Frequentes sobre Operação de Válvulas.

Inovação em P&D

A Xinhui Valve investiu muitos recursos humanos e financeiros em pesquisa e desenvolvimento inovadores de válvulas, e abriu laboratórios, salas de inspeção e salas de P&D. São desenvolvidos 20 tipos de novos produtos anualmente. Válvulas personalizadas para condições severas de válvulas para clientes, dezenas de produtos.

Padrão Internacional

As válvulas que produzimos atendem a diversos indicadores de teste internacionais, e todos os tipos de válvulas são fabricados e aceitos de acordo com os padrões nacionais relevantes, como GB e JB, bem como padrões internacionais como ANSI, API, JIS e BS. DIN. Entre em contato conosco para padrões de produção especiais.

Não somos apenas um fabricante de válvulas, mas também um disseminador de conhecimento da indústria

SOLICITAR ORÇAMENTO PARA MAIS DETALHES